Accuvon (Guangzhou) Pumps Co., Ltd
Excellent lobe pump! Excellent solution for you!
Add to Cart
Membrane Filtration, Self-priming, Reversibility, Lobe Pumps
A water treatment plant uses a total of 4 Accuvon rotary lobe pumps type AX300 in its membrane filtration processes.
The pumps generate a total output up to 750 m³/h. The Accuvon AX300 pump the water through the membranes. The water yields through the finest pores of the membranes. Solids, bacteria etc. are held back by the membranes and are separated from the water. The membranes get cleaned by a periodical back flushing with filtered water. For this reason it was important to the operator of the water treatment plant to use pumps which can be operated reversibly.
Application data:
| Medium | Permeate |
| Flow Rate | 460 – 720 m³/h |
| Pump Speed | approx. 350 – 490 rpm |
| Temperature | 20 °C |
| Pressure | 1 bar |
| Solids Content | / |
Technical data::
| Casing | GG25 |
| Casing protection plate | 316SS |
| Static O-rings | NBR |
| Shaft seal | mechanical seal |
| Rotors | tri-lobe screw profile, NBR Rubber |
| Drive | Helical geared motor, 45 kW |
Advantages of this Accuvon lobe pumps AX300
· Reversibility, same pump output for both directions
· Gentle, Low-Pulsation Pumping
· Self-priming
· Highest energy efficiency
· Short-term dry-run capability
· Ease of maintenance
· Pump speed can be adapted to the viscosity of the medium
FAQ:
| How to order from us? |
| Contact with us and tell your requirement , all components of pump are accepted customized for you |
| Which shipping terms are available? |
| By sea, air, Express |
| How to operate your pump properly? |
| We have the complete English manual, training file and vedios to guide how to install the pump, how to maintain pump. |
| What is your Warranty? |
| We guarantees that the pumps supplied are of high quality and reliability. Warranty is 18 months from the date of manufacturing. If any quality problem, we will send you the parts without cost in 3 working days. |
Similar application of sewage treatment:
For more than 14 years, Accuvon manufactures and develops new innovation of Rotary Lobe Pumps and Macerating Technologies to serve the rising demand for the Waste Water Industry. With a wide range of 16 pump sizes, a large selection of equipment and additional parts, Accuvon is able to cater pumps which are perfectly suited to many waste water applications. The high performance units made important contributions with sewer collections system issues, industrial waste water management, sludge etc…
Dewatered Sludge | Digested Sludge | Dosing / Injection | Flotation Sludge | Lime & Flocculant | Permeate / Filtrate | Primary Sludge | Raw Sewage | Scum and Grease | Sludge Liqour | Thickened Sludge
Features of Accuvon Rotary Lobe Pumps:
1.Self-priming, Valve-less, Positive Displacement Pump
2. Easy Maintenance through Front Cover
3. Controllable Flow, Ratio up to 1 : 5
4. Capacity of up to 3200 m³/h
5.Pressures of up to 25 bar
6. Dry-running Capability
7.Reversibility, same pump output for both directions
8. Gentle, Low-Pulsation Pumping
9.For Viscous, Solid, Abrasive or Shea-sensitive Mediums
10. Low Parts Replacement Costs
Components of a Accuvon Rotary Lobe Pump
1 Timing gear
2 Quench and control chamber
3 Casing in block design
4 Unwetted shaft
5 Axial and radial casing protection
6 Shaft seal
7 Rotors
8 Quick-release cover
