Mobile Skimmer Rotary Lobe Pump FKM Rubber For Pontoon Or Tracked Vehicle

Mobile skimmer pump / Light and compact / On a pontoon or tracked vehicle

A manufacturer of oil spill response equipment in Asia was in search for a pump for mobile units. The units are equipped with small diesel motors and are solely to be used as oily water skimmer pumps during oil spill emergencies in the region. The Accuvon rotary lobe pump was selected due to the low shear, low speed with no friction on the moving pump parts as well as the reduction of oil-water emulsification. The dry-run capability and the low weight of Accuvon aluminum pumps were highly favored by the customer. The compact size gives Accuvon pumps the advantage to be placed in a mobile unit easily.

The skimmer pump is often not installed permanently but designed in such a way that it can be transported to any applications without problems. Each mobile unit is constructed to the customer`s wishes and requirements.

• The AC 50 and AC 75 are now available in an alluminium version

• Because of the light weight, the pumps are well suited for the use as skimmer pumps or as portable pumps

• The pump is extremely compact and very light for the highest performance in a small space.

• As a hand cart

• As a mobile unit with diesel motor

• Portable – for extremely rough terrain

•On a tracked vehicle for coastal protection

•On a pontoon

There are many cases where water is contaminated with oil. Each oil spill disaster requires quick corrective action, or it can pose a high risk of damage to the ecological system.

In order to skim the oil or other floating impurities from the water surface, powerful pumps are needed. Accuvon`s rotary lobe pumps are the perfect solution because they can convey high viscosities and work in slurp-mode.

Liquid as well as viscous or abrasive pumped media can be conveyed effortlessly, and even chemically aggressive substances pose no problem. The Accuvon rotary lobe pump which is insensitive to solids is capable of running dry for a short time and can be used for filling and emptying by reversing the direction of rotation.

Advantages

· Light and compact:

· Low shear effect

· Durable

· Short-term dry-run capability

· Reliable and efficient

· Self-priming

· Pumping in slurping operation

· For highly viscous media

· Resistant to solids

Similar application of sewage treatment:

For more than 14 years, Accuvon manufactures and develops new innovation of Rotary Lobe Pumps and Macerating Technologies to serve the rising demand for the Waste Water Industry. With a wide range of 16 pump sizes, a large selection of equipment and additional parts, Accuvon is able to cater pumps which are perfectly suited to many waste water applications. The high performance units made important contributions with sewer collections system issues, industrial waste water management, sludge etc…

Sewage | Ballast Water | Bilge / Loading | Oil Sludge | Fuel / Crude Oil | Oil-Water Separation | Fish / Kitchen Waste | Mud | Emulsions | Oilfield Chemicals | Marine Diesel Oil | as Skimmer Pump

Components of a Accuvon Rotary Lobe Pump

1 Timing gear

2 Quench and control chamber

3 Casing in block design

4 Unwetted shaft

5 Axial and radial casing protection

6 Shaft seal

7 Rotors

8 Quick-release cover