Stainless Steel Rotary Lobe Sludge Pump Anti Aging Multi Function

Low-Pulse Operation And Compact Design Of Rotary Lobe Pump

The Working principle of ACCUVON Rotary Lobe

• All rotary lobe pumps are designed according to the same construction principle. Two displacement elements / rotors mounted on parallel shafts are supported by an external gearbox .

• The two rotors turn in opposite direction with minimal radial and axial clearances. They neither touch each other nor the surrounding pump casing. The shafts are synchronized by spur gears.

• The rotors are shaped so that they seal the suction chamber against the pressure chamber in any position. This sealing is only achieved by the gap, not by additional seals or valves. The removable pump cover seals the pump housing and allows easy access from the front to achieved easy maintenance for all parts.

The Components of the ACCUVON Rotary Lobe Pump

1. Bearing and timing gear

2. Intermediate chamber

3. Casing in Block design

4. Axial and radial casing liners

5. Shaft seals

6. Rotary Lobes / Rotors

7. Quick-release-cover

8. Non-wetted shafts

Specifications:

Parameter of AP 120

Design 1 | Short, s traight pipe connectors with connection flange and gasket, in mm / inches approx.

Advantages

• Low shear / Sensitive handling and conveying of products

Rotary-lobe-pumps are well known in applications where a low shear is required.

The reasons are :

- The low speed of the pumps,

- The little friction through the rotating elements

- Large chambers inside of the pumps

- Quick flow through the pump

• Service-life of the wearing parts

High service life as the conveying elements are guided without friction on eachother. Wear is only produced by the fluid and the contained solids

• Blockage - free

Good for positive displacement pumps, as ball-entering diameters are relatively large up to 16 cm. No danger of sedimentation. Even when handling heavy solids suspensions, as all casings-areas are continuously cleaned by the conveying elements.

FAQ:

Q: How can I make order ?

A: Contact us and tell us your requirements, and then we will send quotation as your request.After finished payment, we will arrange shipping for you.

Q: Which payments are acceptable?

A: T/T, L/C, Western Union, Paypal

Q: Which shipping terms are available?

A: By sea, air, Express

Q: What guarantee do you have?

A: The product warranty period is 2 years, except for wearing parts (if the product fails to work normally due to poor manufacturing, the company will replace and repair products and parts for users free of charge. Product damage caused by human causes is not covered by the warranty.

Q: Can I purchase parts separately?

A: Yes, all pump spare parts can be purchased separately.

Photo Display