Accuvon (Guangzhou) Pumps Co., Ltd
Excellent lobe pump! Excellent solution for you!
Add to Cart
Mobile vat filling station / By PTO / Liquid manure / Self-priming
A customer required a powerful mobile vat filling station for "bottom and above" filling of transport and spreader vehicles. The vat filling pump was supposed to be operated by the PTO shaft of a tractor. The customer emphasized the need for a pump with a long service life, high resistance to wear and one that is very user-friendly in the event of maintenance. A Accuvon vat filling station with a Accuvon AX 250 rotary lobe pump was selected. Due to the compact dimensions, the mobile vat filling station can be transported easily and used very flexibly. After the PTO shaft has been connected, the boom can be extended to a height of 4.20 m by tractor hydraulics. The loading reach is more than 2.00 m so that even large transport and spreader vehicles can be filled without any problems. The horizontal alignment of the boom can be adjusted manually. Alternatively, filling a vehicle is also possible from "below". In order to ensure quick filling, the pipes are designed in NW 200. The vat filling station belongs to mounting category 2.
Application data:
| Pump type | AX 250 |
| Medium | Liquid manure |
| Flow Rate | 324 m³/h |
| Pump Speed | - 350 rpm |
| Suction pressure | / |
| pH value | Neutral |
| Temperature | Up to 50 °C |
| Pressure | 3 bar |
| Viscosity | / |
Technical data::
| Casing | Gray cast iron |
| Casing protection plate | Hard metal |
| Static O-rings | NBR |
| Shaft seal | SISIC / SISIC |
| Rotors | Tri-lobe, screw profile, NBR |
| Drive | By the PTO shaft of the tractor |
Advantages of the vat filling station
- Customized, practice-oriented construction of the vat filling station
- Compact transport dimensions
- Low operating costs of the rotary lobe pump
- Robust, simple design of the pump
- Transfers abrasive media
- Pressure-resistant
- Self-priming
- Non-wetted shafts
- Ease of maintenance
Similar application of sewage treatment:
Accuvon provides many applications on-board ships and in other areas of the marine industries - from handling of both fresh and seawaters to fuels of all kinds, oil or oil sludge, bilge or other water-oil mixtures, fish or fish waste, sewage or other fluids with or without solids, of low or high viscosities.
Sewage | Ballast Water | Bilge / Loading | Oil Sludge | Fuel / Crude Oil | Oil-Water Separation | Fish / Kitchen Waste | Mud | Emulsions | Oilfield Chemicals | Marine Diesel Oil | as Skimmer Pump
Features of Accuvon Rotary Lobe Pumps:
1.Self-priming, Valve-less, Positive Displacement Pump
2. Easy Maintenance through Front Cover
3. Controllable Flow, Ratio up to 1 : 5
4. Capacity of up to 3200 m³/h
5.Pressures of up to 25 bar
6. Dry-running Capability
7.Reversibility, same pump output for both directions
8. Gentle, Low-Pulsation Pumping
9.For Viscous, Solid, Abrasive or Shea-sensitive Mediums
10. Low Parts Replacement Costs
Components of a Accuvon Rotary Lobe Pump
1 Timing gear
2 Quench and control chamber
3 Casing in block design
4 Unwetted shaft
5 Axial and radial casing protection
6 Shaft seal
7 Rotors
8 Quick-release cover
