Accuvon (Guangzhou) Pumps Co., Ltd
Excellent lobe pump! Excellent solution for you!
Add to Cart
Wear-Resistant / Non-Clogging Lobe Pump For Fruit And Vegetable Waste
Accuvon lobe pump for Fruit and Vegetable Waste
Vegetable processing, especially with potatoes and tomatoes, has an increasing need for reliable solids handling pumps that are capable of pumping starchy, thick slurries with a percentage of solids. Vegetable waste often includes seeds, skins, pulp and other fibrous material that can cause significant problems in pumps in the form of clogging and quickly wearing down pump parts. When these issues start to happen regularly to the installed pumps, significant downtime is likely and it’s a position no company wants to find themselves in. Therefore, investing in the right kind of pump from the onset will eliminate this problem from occurring, saving your countless hours of production time. This waste needs to be removed and disposed of quickly, efficiently, and in a cost-effective way.
For this situation, Accuvon lobe pump can solve perfectly thanks to they are large and direct inlet opening gives highly viscous media and stiff,clumpy elements direct access to the displacement chamber.The medium flows a short distance through the pump chamber, thus ensuring gentle pumping. With fibrous media or media with a tendency to clump, clogging or coiling is nearly impossible.
Specifications:
| ACCUVON | rate of flow l/rev | flow (m³/h) | pressure (Mpa) | speed rpm | Flange diameter DN mm | power Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
Note: Above flange is regular for each model, besides we also offer various flange connection according to your requirements
1. Tested medium in the table: water.
2. Speed, flow rate, electrical power and pressure will be according to different liquid properties.
3. Port size can be changed as needed.
4. ACCUVON reserves the right to change specifications without prior notification.
Advantage
Working Principle
Lobe pump is self-priming, valveless positive displacement pump. Through the two parallel shafts in the synchronous gear to driven the rotor synchronous operation, chamber form a vacuum between the rotor vanes and casting surrounding, so that the medium was inhaled, then displaced through the discharge-side. Pump operating direction can be reversed by changing the direction of rotor rotation, to be a two-way pump for reversing operation.
Quality inspection photos
